• The fastest cut speeds in its class produce more finished parts per hour.
• Engineered with 100% duty cycle for the most demanding production environments.
• Quickly transition between cutting, gouging, mechanized and handheld processes with automatic settings, tool free leads and quick disconnect torches.

Fast cutting speeds = maximum productivity



Low operating cost
 

• Do more with less power:patented consumable designs enable best in class cut speeds and robust production piercing using lower amperage levels.
• Superior cut quality and consistency minimize high cost secondary operations.
• Advanced consumable technologies including LongLife,® CoolFlow™ and significantly increase consumable life to reduce cost per part.

• During development, Hypertherm systems endure rigorous reliability testing procedures equivalent to years of use in extreme operating environments.
• The MAXPRO200 is built with less than half the number of internal parts compared to other systems on the market. Fewer parts provide greater reliability and serviceability.
• Self-diagnostics are performed automatically at startup and continually throughout the cutting process.

• Intuitive one step interface and automatic gas control deliver consistent results without operator intervention.

• Advanced diagnostics simplify troubleshooting and service.
• Optional serial communications allow full control of the system from the CNC

• Significantly lowers operating cost per part up to 50 mm (2″).
• Less dross, less warping, and a smaller heat-affected zone to minimize high-cost secondary operations.
• Increases flexibility to cut and gouge mild steel, stainless steel, aluminum, and stacked, painted or rusted metal.
• Improves mild steel cutting safety over the use of acetylene, a highly flammable gas used for oxyfuel cutting.

Specifications

Virtually dross-free cutting capacity – mild steel 20mm (3/4″)
Production pierce capacity – mild steel 32 mm (1 1⁄4″)
Severance* – mild steel  75 mm (3″)
Bevel – 200 amp consumables support 45° bevel capability

* The thickness that can be severed at approximately 125 mm/min (5ipm) with reduced cut quality.Cutting at severance thickness should be infrequent.

Torch & Consumables
 

• 200 A handheld torch capable of cutting up to 75 mm (3″) for demolition, scrapping and other heavy-duty cutting demands.
• Drag-cutting consumables make it easy to follow a line or template.
• Metal removal rate on mild steel up to 18.7kg/hr (41.2 lbs/hr).
• Plasma gouging can replace grinding or carbon arc gouging for many metal-removal applications. Plasma gouging produces less noise and fumes than carbon arc gouging and avoids risks of metallurgic problems from carbon contamination.

• Hypertherm is ISO 9001:2000 registered.
• Hypertherm’s full-system warranty provides complete coverage for one year on the torch and leads and two years on all other system components.
• Hypertherm’s plasma power supplies are engineered to deliver industry leading energy efficiency and productivity with power efficiency ratings of 90% or greater and power factors up to 0.98. Extreme energy efficiency, long consumable life, and lean manufacturing lead to the use of fewer natural resources and a reduced environmental impact.